2014년 3월 25일 화요일

Microsoft 자격증 70-681 시험덤프

빨리 ITExamDump 덤프를 장바구니에 넣으시죠. 그러면 100프로 자신감으로 응시하셔서 한번에 안전하게 패스하실 수 있습니다. 단 한번으로Microsoft 70-681인증시험을 패스한다…… 여러분은 절대 후회할 일 없습니다.

70-681인증시험은Microsoft사의 인중시험입니다.Microsoft인증사의 시험을 패스한다면 it업계에서의 대우는 달라집니다. 때문에 점점 많은 분들이Microsoft인증70-681시험을 응시합니다.하지만 실질적으로70-681시험을 패스하시는 분들은 너무 적습니다.전분적인 지식을 터득하면서 완벽한 준비하고 응시하기에는 너무 많은 시간이 필요합니다.하지만 우리ITExamDump는 이러한 여러분의 시간을 절약해드립니다.

인재도 많고 경쟁도 많은 이 사회에, IT업계인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지키고 있습니다.우리ITExamDump에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다.

ITExamDump 에서 제공해드리는 Microsoft인증70-681시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. ITExamDump에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. Microsoft인증70-681시험은ITExamDump 표Microsoft인증70-681덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.

ITExamDump 의 Microsoft인증 70-681시험에 도전장을 던지셨나요? 현황에 만족하지 않고 열심히 하는 모습에 박수를 보내드립니다. Microsoft인증 70-681시험을 학원등록하지 않고 많은 공부자료 필요없이ITExamDump 에서 제공해드리는 Microsoft인증 70-681덤프만으로도 가능합니다. 수많은 분들이 검증한Microsoft인증 70-681덤프는 시장에서 가장 최신버전입니다.가격도 친근하구요.

Microsoft 70-681인증시험은 현재IT업계에서 아주 인기 있는 시험입니다.많은 IT인사들이 관연 자격증을 취득하려고 노력하고 있습니다.Microsoft 70-681인증시험에 대한 열기는 식지 않습니다.Microsoft 70-681자격증은 여러분의 사회생활에 많은 도움이 될 것이며 연봉상승 등 생활보장에 업그레이드 될 것입니다.

시험 번호/코드: 70-681
시험 이름: Microsoft (TS: Windows 7 and Office 2010, Deploying)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 85 문항
업데이트: 2014-03-24

70-681 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-681.html

NO.1 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You plan to use a server to deploy Windows 7 by using Lite Touch Installation (LTI).
You need to ensure that this server has the required software for deploying Windows 7 by using LTI. You
install Microsoft Deployment Toolkit (MDT) 2010.
What should you install next?
A. Microsoft Application Compatibility Toolkit
B. System Center Configuration Manager
C. Windows Automated Installation Kit
D. Windows Deployment Services
Answer: C

Microsoft인증   70-681   70-681

NO.2 All client computers in your company run Volume License editions of Windows 7 and Office 2010. All
computers in the company are activated by using Key Management Service (KMS) hosts.
The company is opening a new branch office. The new branch office will not have access to the corporate
network or to the Internet for at least eight months. Windows 7 and Office 2010 have been deployed on
the client computers for the new branch office, but are not yet activated and have not been shipped.
You need to ensure that users in the new branch office will be able to use Windows 7 and Office 2010
without receiving prompts for activation.
What should you do to the new branch office client computers?
A. Enter Full Packaged Product (FPP) license keys for Windows 7 and Office 2010.
B. Enter Original Equipment Manufacturer (OEM) license keys for Windows 7 and Office 2010.
C. Activate Windows 7 and Office 2010 by using Multiple Activation Key (MAK) licenses.
D. Activate Windows 7 and Office 2010 by using the KMS hosts.
Answer: C

Microsoft pdf   70-681   70-681   70-681자료

NO.3 Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You create a
new Windows 7 image. You deploy the image to client computers.
You need to activate the KMS client on the client computers before the client computers are shipped to
users.
Which command should you run?
A. sysprep /oobe
B. sysprep /generalize
C. slmgr.vbs /ato
D. slmgr.vbs /rearm
Answer: C

Microsoft   70-681시험문제   70-681   70-681 dump

NO.4 You have an Active Directory Domain Services (AD DS) environment. All client computers run Windows
XP.
You will use Microsoft Deployment Toolkit (MDT) 2010 to deploy Windows 7 to all client computers. The
deployment project has the following requirements:
User interaction must not be required for any deployment.
You must be able to initiate deployments by using Windows Deployment Services (WDS).
You need to meet the deployment project requirements when you deploy Windows 7 by using MDT 2010.
Which application should you install?
A. Automated Deployment Services
B. Remote Installation Services
C. System Center Configuration Manager
D. System Center Operations Manager
Answer: C

Microsoft   70-681   70-681시험문제   70-681   70-681

NO.5 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008. All client computers run Windows 7. You use Microsoft Deployment Toolkit (MDT) 2010 for
your deployment infrastructure.
You need to configure your deployment infrastructure to use single-instance storage.
Which command should you run?
A. imagex /export
B. oscdimg d
C. sysprep /oobe
D. wpeutil /disableextendedcharactersforvolume
Answer: A

Microsoft   70-681자격증   70-681자료   70-681   70-681

NO.6 You have a single-domain Active Directory Domain Services (AD DS) forest with two domain controllers
that run Windows Server 2008 R2. Your network consists of two subnets. All client computers are located
in one subnet. Both the DHCP server and the Windows Deployment Services (WDS) server are located in
the other subnet.
You need to ensure that client computers can be deployed over the network by using WDS.
What should you do?
A. Forward all client DHCP broadcast packets to only the DHCP server.
B. Forward all client DHCP broadcast packets to only the WDS server.
C. Forward all client DHCP broadcast packets to both the DHCP server and the WDS server.
D. Add a DNS service location (SRV) record for port 60 that is pointed toward the WDS server.
Answer: C

Microsoft   70-681기출문제   70-681   70-681

NO.7 You use Business Desktop Deployment (BDD) 2007 with Update 2 to prepare and deploy Windows
Vista and Office 2007 to client computers.
You install Microsoft Deployment Toolkit (MDT) 2010. The BDD deployment shares are not listed in the
Deployment Workbench.
You need to ensure that the BDD deployment shares can be used with MDT 2010.
What should you do?
A. Create new deployment shares.
B. Open the deployment shares.
C. Copy the deployment shares.
D. Close all deployment shares.
Answer: B

Microsoft시험문제   70-681 pdf   70-681   70-681   70-681시험문제

NO.8 You are using Windows Deployment Services (WDS) to deploy Windows 7 to your company s client
computers. All servers in your network run Windows Server 2008 R2. The WDS server and the DHCP
server are running on the same computer.
You need to ensure that the client computers are able to connect to the WDS server by using PXE.
What should you do first?
A. Add option 60 to the DHCP scope.
B. Add option 64 to the DHCP scope.
C. Block WDS from listening on port 60.
D. Block WDS from listening on port 64.
Answer: A

Microsoft dump   70-681 pdf   70-681

NO.9 You have a single-domain Active Directory Domain Services (AD DS) forest. The network includes a
Windows Deployment Services (WDS) server and a separate DHCP server. You set up a multicast
transmission of Windows 7 and deploy Windows 7 on 100 new client computers via multicast. The
multicast transmission average speed is 512 KBps.
You deploy Windows 7 on an additional 50 new client computers and 2 older client computers via
multicast. The multicast transmission average speed is 56 KBps. You remove the older client computers
and restart the multicast transmission. The multicast transmission average speed is again 512 KBps.
You need to ensure that Windows 7 is deployed on all client computers via multicast and that older client
computers do not decrease the multicast average transmission speed for new client computers.
What should you do?
A. Configure multicast to separate clients into slow, medium, and fast sessions.
B. Configure multicast to automatically disconnect clients below 128 KBps.
C. Configure Multicast Address Dynamic Client Allocation Protocol (MADCAP).
D. Configure the PXE response delay to 0 seconds.
Answer: A

Microsoft   70-681   70-681기출문제   70-681   70-681 dump

NO.10 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You install Microsoft Deployment Toolkit (MDT) 2010 on a server named Server1. You install Microsoft
SQL Server 2008 on a server named Server2. You create an MDT deployment database for
location-specific network installations of Windows 7. Server1 and Server2 run Internet Information
Services (IIS).
You need to ensure that the MDT deployment database supports Windows integrated security from the
Windows Preinstallation Environment (Windows PE).
What should you do?
A. Create a shared folder on Server1.
B. Create a shared folder on Server2.
C. Enable Integrated Windows authentication in IIS on Server1.
D. Enable Integrated Windows authentication in IIS on Server2.
Answer: B

Microsoft pdf   70-681   70-681최신덤프   70-681   70-681인증   70-681

NO.11 Your network has one subnet for servers and one subnet for client computers. The subnets are
separated by a router. In the server subnet, Server1 is a Windows Server 2008 R2 server that runs DHCP
and DNS.
Your deployment infrastructure is configured to allow computers in the client computer subnet to boot by
using PXE. However, client computers that attempt to use PXE to boot are not able to connect to the
deployment infrastructure.
You need to ensure that client computers are able to connect to the deployment infrastructure by using
PXE.
What should you do?
A. Configure DHCP reservations.
B. Configure an IP Helper Address on the router.
C. Place a DNS server in the client computer subnet.
D. Run the netsh dhcp add server Server1 command.
Answer: B

Microsoft기출문제   70-681기출문제   70-681   70-681덤프   70-681자격증

NO.12 Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You have a
Windows 7 image, which will be deployed to the company s client computers.
You deploy the image to a client computer as a test. When you log on to the client computer, a warning
states that the grace period for activation has expired.
You need to prevent the grace period from expiring before the image is deployed to the client computers.
Which command should you run?
A. Sysprep /audit
B. Sysprep /generalize
C. slmgr.vbs /ckms
D. slmgr.vbs /cpky
Answer: B

Microsoft자격증   70-681자격증   70-681 dumps   70-681 pdf

NO.13 You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows
Server 2008 R2.
You add the Windows Deployment Services (WDS) role and the DHCP Server role to a server.
You need to ensure that client computers that boot from the network locate the WDS server automatically.
Which two actions should you perform on the WDS server? (Each correct answer presents part of the
solution. Choose two.)
A. Select the Do not listen on port 67 check box.
B. Select the Configure DHCP option 60 to indicate that this server is also a PXE server check box.
C. Click the Respond to all client computers (known and unknown) option in WDS.
D. Click the Obtain IP address from DHCP option in WDS.
Answer: AB

Microsoft   70-681인증   70-681 pdf

NO.14 All servers in your company run Windows Server 2008. All client computers run Windows Vista and
Office 2007. Key Management Service (KMS) hosts run Windows Server 2008. All computers are
activated by using KMS.
You will deploy Windows Server 2008 R2 to all new servers, and you will deploy Windows 7 and Office
2010 to all client computers.
You need to ensure that all KMS hosts can activate all versions of Windows and Office that are used in the
company.
What should you do?
A. Install the Microsoft Office 2010 KMS Host License Pack on the KMS hosts.
B. Install Volume Activation Management Tool (VAMT) 2.0 on the KMS hosts.
C. Migrate the KMS hosts to computers that run Windows 7.
D. Migrate the KMS hosts to computers that run Windows Server 2008 R2.
Answer: D

Microsoft자격증   70-681   70-681최신덤프   70-681덤프   70-681 pdf   70-681인증

NO.15 Your company uses System Center Configuration Manager 2007 R2 for operating system deployment.
You have a boot image that was previously used to deploy Windows 7 to client computers.
You load the boot image on new client computers that contain new network adapters. The drivers for the
network adapters are not installed after the boot image is loaded.
You need to ensure that the drivers for the network adapters are properly installed during the loading of
the boot image.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install the device drivers on a target computer.
B. Install the device drivers on a reference computer.
C. Import the device drivers into the driver catalog.
D. Add the device drivers to the boot image.
Answer: CD

Microsoft   70-681   70-681자료

ITexamdump의 000-156덤프의 VCE테스트프로그램과 NS0-155덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C4040-123시험에 대비한 고품질 덤프와 E20-554시험 최신버전덤프를 제공해드립니다. 최고품질 HP0-S33시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/70-681.html

댓글 없음:

댓글 쓰기