ITExamDump는 여러분이 빠른 시일 내에IBM 000-197인증시험을 효과적으로 터득할 수 있는 사이트입니다.IBM 000-197덤프는 보장하는 덤프입니다. 만약 시험에서 떨어지셨다고 하면 우리는 무조건 덤프전액 환불을 약속 드립니다. 우리ITExamDump 사이트에서IBM 000-197관련자료의 일부분 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump의IBM 000-197덤프로 자신 있는 시험준비를 하세요.
우리는 여러분이 시험패스는 물론 또 일년무료 업데이트서비스를 제공합니다.만약 시험에서 실패했다면 우리는 덤프비용전액 환불을 약속 드립니다.하지만 이런 일은 없을 것입니다.우리는 우리덤프로 100%시험패스에 자신이 있습니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는IBM인증000-197시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.
ITExamDump는 모든 IT관련 인증시험자료를 제공할 수 있는 사이트입니다. 우리ITExamDump는 여러분들한테 최고 최신의 자료를 제공합니다. ITExamDump을 선택함으로 여러분은 이미IBM 000-197시험을 패스하였습니다. 우리 자료로 여러분은 충분히IBM 000-197를 패스할 수 있습니다. 만약 시험에서 떨어지셨다면 우리는 백프로 환불은 약속합니다. 그리고 갱신이 된 최신자료를 보내드립니다. 하지만 이런사례는 거이 없었습니다.모두 한번에 패스하였기 때문이죠. ITExamDump는 여러분이IBM 000-197인증시험 패스와 추후사업에 모두 도움이 되겠습니다. Pass4Tes의 선택이야말로 여러분의 현명한 선택이라고 볼수 있습니다. Pass4Tes선택으로 여러분은 시간도 절약하고 돈도 절약하는 일석이조의 득을 얻을수 있습니다. 또한 구매후 일년무료 업데이트버전을 바을수 있는 기회를 얻을수 있습니다.
우리 ITExamDump사이트에서 제공되는IBM인증000-197시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 우리ITExamDump의 제품을 구매하신다고 하면 우리는 최선을 다하여 여러분들한테 최고의 버전을 제공함으로 한번에IBM인증000-197시험을 패스하도록 하겠습니다. IT시험이라고 모두 무조건 외우고 장악하고 많은 시간을 투자해야만 된다는 사상을 깨게 될 것입니다.
IBM인증 000-197시험을 한방에 편하게 통과하여 자격증을 취득하려면 시험전 공부가이드가 필수입니다. ITExamDump에서 연구제작한 IBM인증 000-197덤프는IBM인증 000-197시험을 패스하는데 가장 좋은 시험준비 공부자료입니다. ITExamDump덤프공부자료는 엘리트한 IT전문자들이 자신의 노하우와 경험으로 최선을 다해 연구제작한 결과물입니다.IT인증자격증을 취득하려는 분들의 곁은ITExamDump가 지켜드립니다.
시험 번호/코드: 000-197
시험 이름: IBM (PSeries Enterprise Technical Support)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 101 문항
업데이트: 2014-03-17
000-197 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-197.html
NO.1 Which of the following methods can be used to identify which CPUs have been allocated to particular
running partitions?
A.Run the isdv-Cc processor command from the AIX command line in the partition.
B.View the CPU properties for the Managed System from HMC.
C.For each processor run the isattr-Elprocx command.
D.Use the blindprocessor-q command
Answer:B
IBM 000-197시험문제 000-197최신덤프 000-197 000-197시험문제
NO.2 A system administrator wants to move the media drawer CD-ROM on a p670 dynamically between two
active partitions using the HMC. What steps are required to perform this task?
A.1) From HMC select Dynamic Reconfiguration window, click move
2) Select group U1.1.9-P1-15 for CD-ROM
3) Select to and from in Dynamic Reconfiguration, click move
B.1) From HMC select Dynamic Reconfiguration window, click move
2) Select group U1.1.18-P1-I10 for CD-ROM
3) Select to and from in Dynamic Reconfiguration, click move
C.1) From HMC select Dynamic Reconfiguration window, click move
2) Select group 128 for CD-ROM location
3) Select to and from in Dynamic Reconfiguration, click move
D.1) From HMC select Dynamic Reconfiguration window, click move
2) Select group 128 slot 5 for CD-ROM location
3) Select to and from in Dynamic Reconfiguration, click move
Answer: B
IBM 000-197 000-197 000-197
NO.3 which of the following options may NOT be used to install AIX system maintenance(PTFs) in a
partitioned environment?
A.Use NIM to install the PTF images to the partition over the network.
B.Use the software Maintenance function of the HMC to install the PTFs
C.ALLOcate the CD-ROM device to the partition and install from the PTF media.
D.Use Smitty update-all from a common NFS mount point cotain the bifurcated PTF images.
Answer:B
IBM 000-197 000-197 dump
NO.4 Which of the following options are available to remotely manage the HMC?
A.Establish a ssh session with HMC
B.Establish a telent session with HMC
C.Activate the rexec and rsh features on the HMC
D.Install the Trusted Compulting Based and Secure Socket Protocol
Answer:A
IBM dumps 000-197 000-197최신덤프 000-197자료
NO.5 The function Rebuild Managed System can be used to do which of the following?
A. Refresh the NVRAM from the current HMC settings
B. Clear out all the defined partitions from NVRAM
C. Clear out all the defined partitions from the HMC
D. Refresh the HMC from the NVRAM settings
Answer: D
IBM 000-197기출문제 000-197덤프 000-197기출문제
NO.6 In an AIX 5.1 POWER4 LPAR system, the system administrator wants to use an external CD-ROM
that is currently assigned to another partition. What steps are required to accomplish this task?
A.Dynamically allocate the CD-ROM from the old partition to the new partiton using the Dynamic
Reconfiguation Menu.
B.Stop the old partition and the new partition,add the PCI slot to the new partition profile using Dynamic
Reconfiguration Menu, Active both profiles and reboot.
C.Remove the PCI slot from the old profile using dislot, add the PCI slot to the new partition profile using
the Dynamic Reconfiguration Menu, activate the new profile reboot.
D.Stop the partition where tHE CD-ROM is currently assigned, remove the PCI slot from the old profile,
reboot the partition, add the PCI slot to the the new partition profile, activate the new profile.
Answer:D
IBM 000-197시험문제 000-197덤프 000-197자료
NO.7 A customer planning to order a p670/p690 system is informed by the site engineer that due to hight
restrictions, the machine will not fit through the door. Which planning option best accommodates
movement of the p670/690 system through the existing data center doorway?
A.Dismantle the top on site
B.Tilt the machine on its side
C.Disassemble the data center entrance door
D.Order the Top Hat hight reducation option
Answer:D
IBM 000-197 000-197
NO.8 A customer has received an HMC software upgrade package from IBM. Which course of action needs
to be followed at this point?
A.Backup the HMC via the DVD-RAM and install corrective service.
B.Reinstall the HMC using the upgrade media that was received
C.Place a servive call to IBM.
D.Select Service Focal Point from the HMC and apply maintenance
Answer:A
IBM 000-197 000-197최신덤프
NO.9 A customer has a 16-way P690 with 32GB of memory. While doing performance testing on an 8-way
partition, the sar-PALL 15 command shows that there are only 6 CPUs active. The profile has both the
desired and minium number of CPUs set to 8. The other 8 CPUs are allocated to other partitions that are
active.
Which of the following statements is the most likely cause of this situation?
A.The partition was started with a minimum set of 6 CPUs
B.Dynamic CPUs dealiocation detected error in the CPU and disbled them
C.There is not enough contiguous memory to support 8 CPUs in the partition
D.There were not enough CPUs because of the order in which the partitions were started
Answer:B
IBM 000-197 pdf 000-197 000-197
NO.10 A mixed server environment is running AIX version 4.3 and AIX 5.2 that has 32-bit and 64-bit
applications. What needs to be explained to the customer for them to understand what can be run on the
AIX 5.2 64 bit kernel?
A.32-bit and 64-bit applications that were compiled under AIX 4.3 will not run AIX 5.2 systems with 64-bit
kernel.
B.32-bit applications that were compiled under AIX Version 5.1 will not run on AIX 5.2 with a 64-bit kernel
64-bit applications compiled on AIX 4.3 will run on the AIX 5.2 64-bit kernet.
C.64-bit applications that were compliled under AIX Version 4.3 need to be recompiled in order to run
under AIX 5.2 32-bit applications compiled under AIX 5.1 on either 32-bit or 64-bit processor models will
run without recompilation
D.64-bit applications that were compliled under AIX Version 4.3 need to be recompiled in order to run
under AIX 5.2 32-bit applications compiled under AIX 5.1 on 32-bit processor models need to be
recompiled to run on a 64-bit processor.
Answer:C
IBM 000-197인증 000-197자료
NO.11 The HMC "Contents area" displays the system operating state as "incomplete" What should be done to
correct this problem?
A. Rebuild the managed system
B. Hard reset the partition profile
C. Soft reset the partition profile
D. Select the managed system icon and choose recover partition data
Answer: A
IBM 000-197 000-197
NO.12 A customer has a p690 system running AIX 5.1 Configured in LPAR mode. The disk vendor sent a new
firmware CD-ROM that needs to be applied immediatedly. The disk vendor is planning to send their
service representative to accomplish this task. What does the system administrator need to do to prepare
for the service reprsentative without affecting other LPARs?
A.Reassign the media bay from an LPAR
B.Hot swap the interal CD-ROM device between LPARs
C.Attach an external CD-ROM Device via hot swap SCSI controller to an LPAR
D.Dynamically reassign the internal CD-ROM to this LPAR
Answer:C
IBM시험문제 000-197 000-197 pdf 000-197
NO.13 A customer has an 8-way POWER4 p650 system. They have one partition running AIX 5.2, two
partitions running AIX 5.1, and one partition running Linux. What is the procedure to move processors
between partitions?
A.Create new profiles on the HMC for the partitions to be moved. The new profiles will be dynamically
activated.
B.Create new profiles on the HMC for the partitions to be moved. Shut down both currently active
profiles.Manually select and activate the new profiles.
C.Use the grahical user interface or command-lind function of the HMC to dynamically move the
resources from any of the partitions to the AIX 5.2 partition
D.Use the graphical user interface or command-line function of the HMC to dynamically move the
resources from one of the AIX 5.1 partitions to the AIX 5.2 partition.
Answer:B
IBM최신덤프 000-197자격증 000-197최신덤프 000-197자료
NO.14 In a high performance computing environment. If an 8GB and a 32GB memory card is installed in the
MCM# memory slots, what is the performance result?
A.The two cards are treated independently with the data on the application being handled 50/50 across
the L3 cache.
B.The two cards are treated independently with the data on the application being handled 20/80 across
the L3 cache.
C.Any tow memory cards can be installed in the MCM# memory slot without problems as long as they are
installed in pairs.
D.The two cards are treated as one memory store, with the data for an application being handled 50/50
across the L3 cache.
Answer:B
IBM 000-197 000-197 000-197최신덤프
NO.15 A company wants to add as much redundancy to their systems as possible. What PCI-X adapter can be
hot-plugged?
A. An ESCON adapter
B. An adapter supporting the SP Switch
C. A fiber channel adapter connected to the SAN
D. A graphics adapter supporting the system console
Answer: C
IBM자료 000-197 000-197 000-197 pdf
NO.16 What is required for Dynamic LPAR on a POWER4 system?
A.AIX 5L Version 5.2, Hardware Management Consloe. An Ethernet connection between the HMC and
the primary partition on the pSeries server
B.AIX 5L Version 5.1, Hardware Management Consloe. An Ethernet connection between the HMC and
each active partition on the pSeries server
C.AIX 5L Version 5.2, Hardware Management Consloe. A serial connection to the HMC An Ethernet
connection between the HMC and HMC and each active partition on the pSeries server
D.AIX 5L Version 5.1, Hardware Management Consloe. A serial connection to the HMC An Ethernet
connection between the HMC and HMC and each active partition on the pSeries server
Answer:C
IBM최신덤프 000-197 000-197 000-197 pdf
NO.17 A Customer has multiple system administrators managing and monitoring the p690 system. The
customer would like to establish authority for these administrators to create and manage LPARs. Which of
the following is the correct authority level on the HMC?
A.User Administrator
B.Root
C.Operator
D.Advanced Operator
Answer:D
IBM덤프 000-197 000-197시험문제
NO.18 What task must be done immediately before upgrading the software on the HMC to save the system
performance?
A.Save upgrade data
B.Backup critical console data
C.Backup system profiles to diskette
D.Save system preferences from CEC properties
Answer:A
IBM 000-197 000-197 dumps
NO.19 A customer is interested in assigning the devices located in the front and back of the media drawer of
the p670 to multiple LPARs. What should be the suggested configuration?
A. Media drawer front and back connected to dual ported SCSI adapter
B. Media drawer front and back connected to single ported SCSI adapter
C. Media drawer front and back connected to integrated SCSI adapter
D. Media drawer front and back assigned to an empty slot in I/O drawer one
Answer: B
IBM 000-197 000-197자료 000-197
NO.20 A company wants to partition a newly purchased p690 system. The system has AIX 5.1 with 16 CPUs,
32GB of memory and two I/O drawers. What is the maximum number of partitions that can be configured
with greater than 16GB memory?
A.0
B.1
C.2
D.3
Answer: A
IBM 000-197 000-197
ITexamdump의 1Z0-466덤프의 VCE테스트프로그램과 1z0-465덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 VCP-510시험에 대비한 고품질 덤프와 LOT-958시험 최신버전덤프를 제공해드립니다. 최고품질 C4040-224시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기