많은 분들은EMC E20-335인증시험이 아주 어려운 것은 알고 있습니다. 하지만 우리ITExamDump를 선택함으로EMC E20-335인증시험은 그렇게 어렵지 않다는 것을 알게 될 것입니다. Pass4Tes의EMC E20-335합습가이드는 시험의 예상문제부터 전면적이로 만들어진 아주 퍼펙트한 시험자료입니다. 우리의 서비스는EMC E20-335구매 후 최신버전이 업데이트 시 최신문제와 답을 모두 무료로 제공합니다.
ITExamDump의EMC인증 E20-335덤프는 몇십년간 IT업계에 종사한 전문가들이EMC인증 E20-335 실제 시험에 대비하여 제작한 시험준비 공부가이드입니다. EMC인증 E20-335덤프공부가이드로 시험준비공부를 하시면 시험패스가 쉬워집니다. 공부하는 시간도 적어지고 다른 공부자료에 투자하는 돈도 줄어듭니다. ITExamDump의EMC인증 E20-335덤프는 EMC인증 E20-335시험패스의 특효약입니다.
ITExamDump의 EMC인증 E20-335덤프를 선택하여EMC인증 E20-335시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고EMC인증 E20-335시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. EMC인증 E20-335덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.
시험 번호/코드: E20-335
시험 이름: EMC (Symmetrix Solutions Specialist Exam for Implementation Engineers)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 105 문항
업데이트: 2013-10-06
우리ITExamDump 는 많은IT전문가들로 구성되었습니다. 우리의 문제와 답들은 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거이 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 우리ITExamDump는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서는 우리만의 이미지를 지키고 있습니다. 우리는 정확한 문제와답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록합니다.EMC E20-335인증시험을 응시하려는 분들은 저희 문제와 답으로 안심하시고 자신 있게 응시하시면 됩니다. 우리ITExamDump 는 여러분이 100%EMC E20-335인증시험을 패스할 수 있다는 것을 보장합니다.
E20-335 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-335.html
NO.1 You have been asked to create a configuration for a single engine Symmetric V-Max array with 8 DAEs
and 64 drivers. They would like to have the data devices with RAID 5(7+1) protection.
What would be the largest number of members you would recommend for a stripped metavolume.?
A. 4
B. 16
C. 8
D. 32
Answer: B
EMC자격증 E20-335 E20-335최신덤프 E20-335덤프
NO.2 What is recommended before creating a TimeFinder/Mirror replica?
A. Ensure that the production application using the source devices is shut down
B. Ensure that all writes from the production application using the source devices are paused!
C. Ensure that the BCVs are not being actively accessed
D. Set the BCVs to a Not Ready state
Answer: Chttp://www.scribd.com/doc/37352326/Emc-Study-2
NO.3 One of the requirements, during an Open Replicator implementation is that production application
should not be implemented by open Replication session. An analysis of the control Symmetrix showed
that FA ports are currently 70% utilized. How should pace and ceiling be configured?
A. Pace should be set to 0 and Ceiling should be left at the default
B. Pace should be left at the default and Ceiling set to 30
C. Pace should be left at the default and Ceiling set to 100
D. Pace should be set to 9 and Ceiling should be set to 70
Answer: B
EMC E20-335 E20-335
NO.4 An SRDF failover has been executed during the testing phase of an implementation. What is the
expected status of the R1 and R2 devices after performing SRDF failover operation?
A. R1 and R2 Not Ready
B. R1 Wnte Disabled; R2 Read/Wnte
C. R1 Read/Wnte, R2 Read/Wnte
D. R1 Read/Wnte. R2 Wnte Disabled
Answer: Bhttp://www.scribd.com/doc/29541661/Srdf-Operations-white-Paper
NO.5 How does Delta Set Extension help in an SRDF/A deployment?
A. Reduces RPO
B. Reduces the amount of required cache
C. Improves response time
D. Absorbs bursts of host writes
Answer: D
EMC E20-335최신덤프 E20-335 E20-335
NO.6 In symmetric V-max series array running Enginuity 5874, which device is used as a pass-through
device for Auto provisioning?
A. VDEV
B. VCM
C. ACLX
D. SFS
Answer: C
EMC E20-335 dump E20-335시험문제 E20-335 E20-335 E20-335자료
NO.7 Where is the volume Logix Database maintained starting with DMX-3?
A. VCM gatekeeper
B. Symmetrix logical Volume
C. Symmetrix File System
D. VCM database.
Answer: C
EMC E20-335기출문제 E20-335인증 E20-335
NO.8 Which command is used to set or reset HBA port flags on Symmetric arrays running Enable 7.0
Enginuity 5874?
A. symcfg
B. symmask
C. symconfigure
D. symaccess
Answer: D
EMC E20-335 E20-335 E20-335인증
NO.9 Which file contains the parameter that can change the default behavior of SYMCLI operations, and
there control actions?
A. SYMCLI options File
B. SYMAPI Options File
C. SYMCLI Command File
D. SYMAPI Command File
Answer: B
EMC기출문제 E20-335기출문제 E20-335 E20-335기출문제 E20-335시험문제 E20-335인증
NO.10 On the Symmetrix platform, which type of RAID protection ensures the best random write performance?
A. RAID 1
B. RAID S
C. RAID 6
D. RAID 5
Answer: A
EMC E20-335 E20-335자격증
NO.11 Refer to the exhibit
What is the correct state for the Standard and Rl-BCV prior to issuing a symreplicate start command?
A. Synchronized
B. Suspended
C. Split
D. Write-Enable
Answer: C
EMC덤프 E20-335덤프 E20-335시험문제
NO.12 Refer to the exhibit.
A database server has its logs stored on a volume on the log source Symmetrix V-Max array and its data
stored on a volume on the data source Symmetrix V-Max array. Both source Symmetrix V-Max array
frames replicate data to the target Symmetrix V-Max array at the Remote site. There are two device
groups that have been defined:
One group for the data volume on the Symmetrix containing the data LUNs
One group for the log volume on the Symmetrix containing the log LUNS
What happens if the SRDF inks between the Symmetrix contain the data LUNs and the target Symmetrix
were to fail?
A. The R2 data in the database remains consistent because Enginuity Consistency Assist (RDFECAJ
technology would ensure data consistency).
B. The data in the database becomes inconsistent at the Remote site.
C. An SRDF failover would be initiated on all volumes and processing will automatically be switched over
to the Remote site
D. The R2 volumes in the Symmetrix V-Max containing the log LUNs would become write-disabled to the
database server
Answer: C
EMC dump E20-335기출문제 E20-335기출문제 E20-335
NO.13 Open Replicator pull will be used to move data between a third party array and a Symmetrix V-Max
array.
What is recommended before starting the Open Replicator session?
A. Ensure that the remote devices are Host read/write enabled
B. Ensure that the control devices are Not Ready
C. Ensure that the remote devices are Host inaccessible
D. Ensure that the control devices are Write Disabled
Answer: C
EMC덤프 E20-335자료 E20-335기출문제
NO.14 Diagnostic messaging for the GNS daemon is written to which file?
A. /7SYMAPI/emc/storgnsd .log0
B. /SYMAPI/log/storgnsd.log0
C. /SYMAPl/usr/storgnsd log0
D. /SYMAPl/bin/storgnsd log0
Answer: B
EMC E20-335 pdf E20-335 E20-335 dumps E20-335
NO.15 What is required to ensure the integrity of data on the R2 volume during a SRDF fallback operation?
A. Remove entries from the file system table
B. Stop any applications that are accessing the R2 volume
C. Disable journaling on the file system
D. Suspend the RDF link
Answer: B
EMC pdf E20-335 E20-335 dumps E20-335 dumps
ITexamdump의 HP5-K01D덤프의 VCE테스트프로그램과 C-TSCM62-65덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 646-365시험에 대비한 고품질 덤프와 70-323시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-Z24시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기