HP HP0-Y37 인증시험

ITExamDump에서 출시한 HP 인증 HP0-Y37시험덤프는ITExamDump의 엘리트한 IT전문가들이 IT인증실제시험문제를 연구하여 제작한 최신버전 덤프입니다. 덤프는 실제시험의 모든 범위를 커버하고 있어 시험통과율이 거의 100%에 달합니다. 제일 빠른 시간내에 덤프에 있는 문제만 잘 이해하고 기억하신다면 시험패스는 문제없습니다.

HP인증HP0-Y37시험준비를 하고 계시다면ITExamDump에서 출시한HP인증HP0-Y37덤프를 제일 먼저 추천해드리고 싶습니다. ITExamDump제품은 여러분들이 제일 간편한 방법으로 시험에서 고득점을 받을수 있도록 도와드리는 시험동반자입니다. HP인증HP0-Y37시험패는ITExamDump제품으로 고고고!

다른 방식으로 같은 목적을 이룰 수 있다는 점 아세요? 여러분께서는 어떤 방식, 어느 길을 선택하시겠습니까? 많은 분들은HP인증HP0-Y37시험패스로 자기 일에서 생활에서 한층 업그레이드 되기를 바랍니다. 하지만 모두 다 알고계시는그대로HP인증HP0-Y37시험은 간단하게 패스할 수 있는 시험이 아닙니다. 많은 분들이HP인증HP0-Y37시험을 위하여 많은 시간과 정신력을 투자하고 있습니다. 하지만 성공하는 분들은 적습니다.

시험 번호/코드: HP0-Y37

시험 이름: HP (Migrating &Troubleshooting Enterprise Networks)

HP인증 HP0-Y37시험은 빨리 패스해야 되는데 어디서부터 어떻게 시험준비를 시작해야 하는지 갈피를 잡을수 없는 분들은ITExamDump가 도와드립니다. ITExamDump의 HP인증 HP0-Y37덤프만 공부하면 시험패스에 자신이 생겨 불안한 상태에서 벗어날수 있습니다.덤프는 시장에서 가장 최신버전이기에 최신 시험문제의 모든 시험범위와 시험유형을 커버하여HP인증 HP0-Y37시험을 쉽게 패스하여 자격증을 취득하여 찬란한 미래에 더 가깝도록 도와드립니다.

그렇게 많은 IT인증덤프공부자료를 제공하는 사이트중ITExamDump의 인지도가 제일 높은 원인은 무엇일가요?그건ITExamDump의 제품이 가장 좋다는 것을 의미합니다. ITExamDump에서 제공해드리는 HP인증 HP0-Y37덤프공부자료는HP인증 HP0-Y37실제시험문제에 초점을 맞추어 시험커버율이 거의 100%입니다. 이 덤프만 공부하시면HP인증 HP0-Y37시험패스에 자신을 느끼게 됩니다.

HP0-Y37 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y37.html

NO.1 Which statements about BPDU Guard are correct? (Select three.)
A. It is a Cisco proprietary protocol that prevents other switches from sending BDPUs.
B. BPDU Guard filters the standard BDPUs received on the port.
C. BPDU Guard filters the PVST BDPUs received on the port.
D. BPDU Guard generates an alarm when a BPDU is received on the port and may block the port.
E. BPDU Guard is an open standard.
F. BPDU Guard is not a protocol. It must be applied locally and individually on switches.
Answer: B,D,F

HP   HP0-Y37   HP0-Y37   HP0-Y37 dump   HP0-Y37

NO.2 You want to enable RRPP on interface Gigabit Ethernet 1/0/4 of an HP A-Series switch. Which
commands should be configured on this interface? (Select two.)
A. stp disable
B. rrrp ring 1 enable
C. port link-type trunk
D. port link-type rrpp
E. stp enable
Answer: A,C

HP   HP0-Y37 pdf   HP0-Y37

NO.3 Click the Exhibit button.
A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer
has three branch offices that will be interconnected by MPLS Layer-3 VPNs. The address blocks chosen
by the customers for each site are shown in the following chart:
The provider uses OSPF as its IGP with the Loopback 0 addresses shown as the OSPF router-id and the
MPLS LSR-ID. A traceroute from Cust-A Site #1 to Cust-A Site #2 displays 5 intermediate routers.
Which statements are true? (Select three.)
A. MPLS label TTL expires on P-10.
B. TTL propagation is enabled on PE-1.
C. All but the first trace is processed by PE-2.
D. IP TTL expires on P-20.
E. PE-1 generates ICMP echo replies on behalf of P-10 and P-20.
F. TTL propagation is disabled on PE-1.
Answer: A,B,C

HP dumps   HP0-Y37   HP0-Y37   HP0-Y37자격증

NO.4 A company's LAN is composed of Cisco switches only. The network runs Rapid PVST+ with the short
pathcost method. Cisco distribution switches are set as root and secondary root in all VLANs. These two
switches connect over an Etherchannel. The company wants to install HP PoE switches at the edge of its
LAN. The customer wants to keep the load-balancing of traffic that is set in PVST+. What are the possible
options? (Select three.)
A. ensure Spanning Tree is disabled on the HP edge switch, and configure loop-protection on edge ports
to avoid local loops
B. if the HP edge switch is an A-Series switch, configure Smart Link with load balancing between
instances
C. if the HP edge switch is an A-Series switch, configure Rapid PVST+ on it
D. configure MSTP on the HP edge switch, but set the cost of its uplink higher than that on the channel
between the distribution switches
E. configure MSTP on the HP edge switch and divide the VLANs into different instances
F. configure MSTP on the HP edge switch and set its uplink port cost to 5
G. configure MSTP on the HP edge switch, but set the cost of its uplink lower than that on the channel
between the distribution switches
Answer: A,B,D

HP   HP0-Y37   HP0-Y37   HP0-Y37   HP0-Y37자료

NO.5 Click the Exhibit button and view the three exhibits.
When interface Serial 4 of Router 2 fails, traffic from Router 1 destined for network 156.152.0.0/16 leaves
AS 65001 via the Serial 3 interface of Router 1. The administrator prefers that this traffic leaves AS 65001
through interface Serial 5 of Router 2. Which configuration change will achieve the desired results?
A. Router-2#
bgp 100
peer 16.0.0.1 next-hop-local
B. Router-2#
route-policy Policy permit node 10
apply local-preference 500
bgp 100
peer 156.152.5.1 route-policy Policy
C. Router-2#
route-policy Policy permit node 10
apply preferred-value 500
bgp 100
peer 156.152.5.1 route-policy Policy
D. Router-1#
route-policy Policy permit node 10
apply preferred-value 500
bgp 100
peer 16.0.0.2 route-policy Policy
Answer: A

HP인증   HP0-Y37기출문제   HP0-Y37 dump   HP0-Y37

NO.6 Click the Exhibit button.
You are replacing a Cisco BGP router with an HP A-Series BGP router. Examine the router's
configurations. Which statements accurately describe the routers' configurations? (Select three.)
A. Both configurations are identical in function.
B. The HP A-Series router will not implement the same BGP functions as the Cisco router.
C. Both BGP routers announce a static route to its BGP neighbor.
D. Both BGP routers announce network 215.34.10.0/22.
E. Neither BGP routers can announce a redistributed static route because no metrics are set.
F. The A-Series router's prefix list is misconfigured.
Answer: A,C,D

HP   HP0-Y37 dumps   HP0-Y37기출문제   HP0-Y37

NO.7 Which statements are true about DHCP Snooping? (Select two.)
A. DHCP Snooping is a Cisco Proprietary protocol. The standard is not yet ratified.
B. DHCP Snooping prevents end nodes from receiving IP address assignments from an unauthorized
DHCP server.
C. DHCP Snooping is a malicious attack against the DHCP servers.
D. The DHCP Snooping binding table contains information about hosts interconnected with a trusted
interface.
E. DHCP Snooping is when a switch acts as a DHCP server for end nodes that connect to that particular
switch. This way, end nodes always get an IP address.
F. When configuring DHCP Snooping on a switch, you define which ports are trusted to receive DHCP
offers. Typically uplinks of a switch are trusted and Edge ports are untrusted.
Answer: B,F

HP   HP0-Y37 dump   HP0-Y37최신덤프   HP0-Y37

NO.8 A provider of MPLS services configures MPLS Layer-3 VPN services for three customers. Each
customer has three branch offices that will be interconnected by MPLS Layer-3 VPNs. One customer is
advertising their IP prefixes between sites using BGP. This customer establishes a backup link directly
connecting Site-1 to Site-2. Which BGP attribute can the provider use to prevent routing update loops in
the MPLS network?
A. COO
B. FOO
C. KOO
D. SOO
E. VOO
Answer: D

HP기출문제   HP0-Y37   HP0-Y37시험문제   HP0-Y37   HP0-Y37

NO.9 DRAG DROP
Click the Task button. In a multihome AS, you are replacing one of the BGP-configured Cisco routers with
a BGP-configured HP A-Series router. You want to reduce the downtime during the migration process.
Place the steps for the migration in the correct order.
Answer:

NO.10 Which protocols are supported on the HP A-Series switch? (Select three.)
A. SSH v1 only
B. SSH v1 and v2
C. RADIUS only
D. TACACS+ and RADIUS
E. TACACS and RADIUS
F. SNMPv2c only
G. SNMPv2c and SNMPv3
Answer: B,D,G

HP덤프   HP0-Y37인증   HP0-Y37

NO.11 You want to add HP edge switches to a company's Cisco network. Distribution Cisco switches are set as
the Rapid PVST+ root and secondary root. You connect HP A-Series switches that are running their
factory default configuration to the two Cisco distribution switches. What will happen.?
A. If you connect the edge switch with a redundant link to both distribution switches, you create a loop and
a broadcast storm on the Cisco network.
B. Cisco distribution switches send tagged PVST+ BPDUs to the HP switch. Because 802.1q is not yet
configured on HP switch uplinks, the PVST+ BPDUs are dropped. A loop occurs.
C. Cisco distribution switches send untagged standard BPDUs to the HP switch in VLAN 1, and in
response the HP switch blocks one of the uplinks on all VLANs, preventing a loop.
D. Cisco distribution switches send untagged standard BPDUs to HP switch in VLAN 1, which the HP
switch forwards to the other distribution switch, preventing a loop. The HP switch drops all tagged data
frames.
Answer: D

HP   HP0-Y37인증   HP0-Y37   HP0-Y37   HP0-Y37

NO.12 Click the Exhibit button.
Which statements are true about the BGP configuration of this HP A-Series router? (Select two.)
A. The router announces IP prefix 200.1.0.0/23 to its BGP neighbor if the network is in routing table.
B. The as-path ACL define networks that were last forwarded by AS 200.
C. The configuration includes a filter out to the neighbor 222.222.10.1.
D. The BGP router is in AS 200 and its BGP neighbor is in AS 100.
E. The BGP router will establish a BFD connection with its BGP neighbor 222.222.10.1 if the neighbor is
also configured for BFD
Answer: A,E

HP자격증   HP0-Y37   HP0-Y37 dumps   HP0-Y37   HP0-Y37최신덤프   HP0-Y37 pdf

NO.13 What is a characteristic of load balancing in RRPP?
A. multiple RRPP rings within a domain
B. overlapping RRPP rings
C. multiple RRPP domains with different root priorities
D. It is not possible to load balance with RRPP.
E. multiple RRPP domains sharing the same ring
Answer: E

HP최신덤프   HP0-Y37덤프   HP0-Y37   HP0-Y37   HP0-Y37

NO.14 Which statement is true about BGP Route Refresh? (Select two.)
A. Route Refresh is a feature for supported CPU functions with BGP routers that manage high number of
IP Prefixes.
B. Route Refresh is advertised as a BGP capability to BGP neighbors during BGP session
establishment.
C. BGP Route Refresh eliminates the need for a Hard Reset of the BGP connection with a BGP neighbor
when route policies are changed.
D. With Route Refresh, a BGP router stores all BGP prefixes sent by a BGP neighbor.
E. With Route Refresh, a BGP Hard Reset is used to generate inbound updates from a neighbor or to
generate outbound updates to a neighbor.
Answer: B,C

HP   HP0-Y37   HP0-Y37

NO.15 Click the Exhibit button.
A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer
has three branch offices that will be interconnected by MPLS Layer-3 VPNs. The following are address
blocks chosen by the customers for each site as shown in the chart:
The provider uses OSPF as its IGP with the Loopback 0 addresses shown as the OSPF router-id and the
MPLS LSR-ID. Customer A uses a default route on each site. Customer B uses eBGP to exchange routes
with the provider. All MPLS layer-3 VPNs are functioning properly. Which configuration change will cause
Customer-A Site 1 to lose access to Customer-A Site 2?
A. [PE-1]
bgp 1
undo import-route static
B. [P-10]
ospf 1
area 0
abr-summary 16.0.0.2 30 cost 1000
C. [PE-1]
int vlan 100
undo mpls ldp
D. [PE-3]
bgp 1
undo peer 16.0.0.1 reflect-client
E. [P-10]
ip route static 10.1.0.0 16 null 0 preference 9
Answer: B

HP   HP0-Y37   HP0-Y37   HP0-Y37   HP0-Y37 pdf

ITExamDump의HP인증 HP0-Y37 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. ITExamDump의 인지도는 업계에 널리 알려져 있습니다. HP인증 HP0-Y37덤프로HP인증 HP0-Y37시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. HP인증 HP0-Y37덤프는 실제HP인증 HP0-Y37시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.