HP2-Z12 덤프 HP 인증

ITExamDump에는 전문적인 업계인사들이HP HP2-Z12시험문제와 답에 대하여 연구하여, 시험준비중인 여러분들한테 유용하고 필요한 시험가이드를 제공합니다. 만약ITExamDump의 제품을 구매하려면, 우리ITExamDump에서는 아주 디테일 한 설명과 최신버전 최고품질의자료를 즉적중율이 높은 문제와 답을제공합니다.HP HP2-Z12자료는 충분한 시험대비자료가 될 것입니다. 안심하시고 ITExamDump가 제공하는 상품을 사용하시고, 100%통과 율을 확신합니다.

ITExamDump는 여러 it인증에 관심 있고 또 응시하고 싶으신 분들에게 편리를 드립니다. 그리고 많은 분들이 이미 ITExamDump제공하는 덤프로 it인증시험을 한번에 패스를 하였습니다. 즉 우리 ITExamDump 덤프들은 아주 믿음이 가는 보장되는 덤프들이란 말이죠. ITExamDump에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이HP인증HP2-Z12시험을 패스할 수 있을 자료 등을 만들었습니다 여러분이HP인증HP2-Z12시험에 많은 도움이HP2-Z12될 것입니다. ITExamDump 가 제공하는HP2-Z12테스트버전과 문제집은 모두HP2-Z12인증시험에 대하여 충분한 연구 끝에 만든 것이기에 무조건 한번에HP2-Z12시험을 패스하실 수 있습니다.

ITExamDump의HP인증HP2-Z12자료는 제일 적중률 높고 전면적인 덤프임으로 여러분은 100%한번에 응시로 패스하실 수 있습니다. 그리고 우리는 덤프를 구매 시 일년무료 업뎃을 제공합니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는HP인증HP2-Z12시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.

여러분은 아직도HP HP2-Z12인증시험의 난이도에 대하여 고민 중입니까? 아직도HP HP2-Z12시험 때문에 밤잠도 제대로 이루지 못하면서 시험공부를 하고 있습니까? 빨리빨리ITExamDump를 선택하여 주세요. 그럼 빠른 시일내에 많은 공을 들이지 않고 여러분으 꿈을 이룰수 있습니다.

시험 번호/코드: HP2-Z12

시험 이름: HP (Servicing HP Networking Products)

It 업계 중 많은 분들이 인증시험에 관심이 많은 인사들이 많습니다.it산업 중 더 큰 발전을 위하여 많은 분들이HP HP2-Z12를 선택하였습니다.인증시험은 패스를 하여야 자격증취득이 가능합니다.그리고 무엇보다도 통행증을 받을 수 잇습니다.HP HP2-Z12은 그만큼 아주 어려운 시험입니다. 그래도HP HP2-Z12인증을 신청하여야 좋은 선택입니다.우리는 매일매일 자신을 업그레이드 하여야만 이 경쟁이 치열한 사회에서 살아남을 수 있기 때문입니다.

수많은HP인증 HP2-Z12시험공부자료중에서ITExamDump의HP인증 HP2-Z12덤프가 가장 출중한 원인은 무엇일가요? ITExamDump의HP인증 HP2-Z12덤프는 실제시험문제의 출제방향을 연구하여 IT전문가로 되어있는 덤프제작팀이 만든 최신버전 덤프입니다. ITExamDump의HP인증 HP2-Z12덤프가 있으면 힘든HP인증 HP2-Z12시험이 쉬어져서 자격증을 제일 빠른 시간내에 취득할수 있습니다.제일 어려운 시험을 제일 간단한 방법으로 패스하는 방법은ITExamDump의HP인증 HP2-Z12덤프로 시험준비 공부를 하는것입니다.

HP2-Z12 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP2-Z12.html

NO.1 A faulty configuration on an HP A Series switch locked a customer out of the management interface.
You bypass the configuration and gain access to the switch's CLI.Your manager asks
you to send her the configuration to examine.
What must you do?
A. Establish IP connectivity between the switch and a BackUp the Startup-Config to a TFTP Server server
and issue the backup command
B. Use the copy command to copy the configuration to your management station.
C. Establish IP connectivity between the switch and your management station and use the save
command to save the configuration.
D. Use the saved-configuration command to select the startup-config and save it out to your management
station.
Answer: A

HP   HP2-Z12   HP2-Z12   HP2-Z12기출문제

NO.2 Which HP A Series switches provide Layer 2 functionality and a Web browser interface but no CLI?
A. HP A5800 Series switches
B. HP NJ2000GIntelliJack switches
C. HP A3600-E1 Series switches
D. HP A3100 Series switches
Answer: B

HP pdf   HP2-Z12   HP2-Z12   HP2-Z12시험문제   HP2-Z12기출문제

NO.3 Which switch is specifically designed for networks that require basic connectivity and have little or no IT
support?
A. fixed-port switch
B. light Layer 3 switch
C. modular switch
D. unmanaged switch
Answer: D

HP덤프   HP2-Z12자격증   HP2-Z12인증   HP2-Z12   HP2-Z12기출문제   HP2-Z12

NO.4 You check the startup-config on an HP A Series switch and find that the switch uses myconfig.cfg as
the main startup-config and has no backup config. What happens if you use the undo startup
savedconfiguration command?
A. The myconfig.cfg file is deleted, and the switch returns to factory default settings at the next reboot.
B. The myconfig.cfg file becomes the backup startup-config, and the switch returns to factory default
settings at the next reboot.
C. The myconfig.cfg file becomes the backup startup-config, and is booted at the next reboot unless you
set another main startup-config
D. The myconfig.cfg file is retained in the switch's memory, but the switch returns to factory default
settings at the next reboot
Answer: D

HP   HP2-Z12자격증   HP2-Z12인증

NO.5 Which area of the network is considered the backbone?
A. data center
B. core
C. distribution layer
D. LAN access layer
Answer: B

HP   HP2-Z12시험문제   HP2-Z12   HP2-Z12   HP2-Z12   HP2-Z12

NO.6 You are installing a redundant power supply in an HP E8212 zl switch. Which procedures are
recommended when installing the new power supply?(Select two.)
A. Remove the copper RFI shielding.
B. Attach the new power supply to a different AC power source than the existing power supply to provide
true redundancy.
C. Tighten the retaining screws on the new power supply until they are snug but not over-tight.
D. Connect the redundant power supply to the AC power source before installing it in the switch.
E. Remove the grounding tap from the console port before installing the power supply.
Answer: B,C

HP pdf   HP2-Z12자료   HP2-Z12   HP2-Z12

NO.7 You are troubleshooting a connection on an HP A Series switch that has one LED per-port. You want to
know if the port is operating in the wrong duplex mode. How do you use the LED to obtain relevant
information?
A. Click the Mode button until the mode LED is blinkinggreenand thencheck the port LED.
B. Click the Mode button until the mode LED is yellow and thencheck the port LED.
C. Check if the port LED is blinking,which indicates its duplex status (while its color indicates speed).
D. Check the color of the port LED, which indicates its duplex status (while its blinking indicates speed).
Answer: B

HP   HP2-Z12   HP2-Z12시험문제

NO.8 You log in to an HP A Series switch over a console session in order to establish IP connectivity
between the switch and the rest of the network. What is the minimum user privilege level needed to
complete this task?
A. Operator
B. Monitor
C. System
D. Manage
Answer: C

HP   HP2-Z12   HP2-Z12시험문제

NO.9 You are troubleshooting an HP A Series switch. You attempt to log in to both the CLI and the Web
browser interface in several different ways, but you are always prompted for credentials. The customer
tells you that the person who created the passwords is no longer employed by the company. What can
you do to access the switch?
A. Use the failsafe credentials, admin for username and password for password.
B. Press the Reset and Clear buttons on the switch's front panel, holding them for at least 5 seconds, to
clear the password
C. Access the Boot ROM menu and bypass the configuration, starting the switch at factory default
settings.
D. Access the switch over a direct console connection, which always permits access without a password.
Answer: C

HP pdf   HP2-Z12   HP2-Z12최신덤프   HP2-Z12덤프   HP2-Z12   HP2-Z12

NO.10 Which E Series switches require two power supplies to be completely operational? (Select two.)
A. HP E4200vl switch
B. HP E5406zl switch
C. HP E5412zl switch
D. HP E2900 al switch
E. HP E8212zl switch
Answer: C,E

HP자격증   HP2-Z12최신덤프   HP2-Z12자료   HP2-Z12   HP2-Z12

NO.11 Which HP E Switch Series is specifically designed to be deployed in a data center?
A. E4200vl
B. E6200yl
C. E6600
D. E8200zl
Answer: C

HP   HP2-Z12   HP2-Z12

NO.12 You are installing an SFP transceiver in an HP A Series switch's SFP port. Which steps should you
perform? (Select two.)
A. Connect the fiber optic cable to the SFP transceiver before installing the transceiver.
B. Slide the transceiver into the SFP port until the spring clips catch.
C. Rotate the clasp, if present on the front of the transceiver, until it catches the knob.
D. Press and hold the spring clips on the SFP port
E. Press and hold the release button below the SFP port.
Answer: B,C

HP   HP2-Z12   HP2-Z12덤프   HP2-Z12 dump   HP2-Z12 dump

NO.13 You are installing an HP A Series switch that requires a backup power supply as well as extra power for
Power over Ethernet (PoE) devices. Which device should you connect to this switch?
A. RPS 1200 A
B. RPS 1000 A3
C. RPS 800 A
D. RPS500 A3
Answer: B

HP기출문제   HP2-Z12   HP2-Z12   HP2-Z12자료

NO.14 How can you check the status of the ports that are providing Power over Ethernet (PoE) on an HP
E2610-PWR switch?
A. Use the Mode button to selectPoE and then view the port Link and Mode LEDs
B. Use the Port Locator button to selectPoE and then view the port Status and Link LEDs.
C. View the portPoE LED.
D. Use the switch'sPoE LED and the PoE LED for each port.
Answer: A

HP dump   HP2-Z12시험문제   HP2-Z12덤프   HP2-Z12

NO.15 The exhibit shows the Power and seven-segment LEDs of an HP A Series switch. What is the switch's
status?
Exhibit:
A. The switch has member ID 8 in the cluster.
B. The switch has member ID 8 in the cluster, but its attempt to join the cluster has failed.
C. The switch has failed the power on self test (POST) with ID 8.
D. Port number 8 has failed the switch's power on self test (POST).
Answer: C

HP인증   HP2-Z12   HP2-Z12자격증   HP2-Z12

NO.16 Which device forwards network traffic based only on Layer 2 information?
A. router
B. switch
C. hub
D. firewall
Answer: C

HP   HP2-Z12   HP2-Z12시험문제   HP2-Z12기출문제   HP2-Z12

NO.17 Several HP A Series switches are distinguished by a dual-personality (or combo) port. What is an
accurate description of this port?
A. It can accept either Ethernet Base-T cable or fiber optic cable
B. It can accept either Ethernet Base-T cable or a small form-factor pluggable (SFP) transceiver
C. It is a pair of ports. One accepts Ethernet Base-T cable and one accepts a small form-factor pluggable
(SFP) transceiver. Both can be used simultaneously.
D. It is a pair of ports. One accepts Ethernet Base-T cable and one accepts a small form-factor pluggable
(SFP) transceiver. Only one can be used at a time.
Answer: B

HP기출문제   HP2-Z12시험문제   HP2-Z12기출문제

NO.18 You have been sent to a customer site to check an HP E8212 zlswitch. When you arrive, you notice
that the Fault and Fan Status LEDs are flashing. What is the most likely cause of this LED behavior?
A. The cooling fan is no longer functional
B. The switch is brand new and needs to have the most current firmware installed.
C. The external power supply has failed, causing the fan to malfunction.
D. The switch has failed its self-test
Answer: C

HP인증   HP2-Z12   HP2-Z12

NO.19 You are servicing an HP A Series switch, which is currently using a file call myconfig.cfg for the
startup-config. You want to preserve your new configuration changes in the switch's startup config.
Which command should you use?
A. write memory
B. save
C. save startup.cfg
D. copy running-config startup-config
Answer: D

HP최신덤프   HP2-Z12자격증   HP2-Z12자격증   HP2-Z12자료

NO.20 DRAG DROP
Match the HP A Series switch user interface with the type of access that it controls.
Answer:

ITExamDump 의 HP인증 HP2-Z12덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있는데 소프트웨어버전은 시뮬레이션버전입니다. 소프트웨어버전의 문제를 푸는 과정은 시험현장을 연상케하여 시험환경에 먼저 적응하여 실제시험에서 높은 점수를 받도록 도와드릴수 있습니다.