IBM 000-617 덤프

ITExamDump의 IBM인증000-617시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의IBM인증000-617시험덤프자료를 제공받을수 있습니다.

안심하시고ITExamDump 를 선택하게 하기 위하여, ITExamDump에서는 이미IBM 000-617인증시험의 일부 문제와 답을 사이트에 올려놨으니 체험해보실 수 있습니다. 그러면 저희한테 신뢰가 갈 것이며 또 망설임 없이 선택하게 될 것입니다. 저희 덤프로 여러분은 한번에 시험을 패스할 수 있으며 또 개인시간도 절약하고 무엇보다도 금전상으로 절약이 제일 크다고 봅니다. ITExamDump는 여러분들한테 최고의IBM 000-617문제와 답을 제공함으로 100%로의 보장 도를 자랑합니다, 여러분은IBM 000-617인증시험의 패스로 IT업계여서도 또 직장에서도 한층 업그레이드되실 수 있습니다. 여러분의 미래는 더욱더 아름다울 것입니다.

우리ITExamDump의 덤프는 여러분이IBM 000-617인증시험응시에 도움이 되시라고 제공되는 것입니다, 우라ITExamDump에서 제공되는 학습가이드에는IBM 000-617인증시험관연 정보기술로 여러분이 이 분야의 지식 장악에 많은 도움이 될 것이며 또한 아주 정확한IBM 000-617시험문제와 답으로 여러분은 한번에 안전하게 시험을 패스하실 수 있습니다,IBM 000-617인증시험을 아주 높은 점수로 패스할 것을 보장해 드립니다,

지금 같은 경쟁력이 심각한 상황에서IBM 000-617시험자격증만 소지한다면 연봉상승 등 일상생활에서 많은 도움이 될 것입니다.IBM 000-617시험자격증 소지자들의 연봉은 당연히IBM 000-617시험자격증이 없는 분들보다 높습니다. 하지만 문제는IBM 000-617시험패스하기가 너무 힘듭니다. ITExamDump는 여러분의 연봉상승을 도와 드리겠습니다.

시험 번호/코드: 000-617

시험 이름: IBM (IBM Certified System Admin - DB2 10 System Admin for z/OS)

000-617 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-617.html

NO.1 The DB2 command -SET SYSPARM lets you change subsystem parameters while DB2 is up.
What is the correct syntax for loading a different DSNZPARM load module?
A. -SET SYSPARM LOAD
B. -SET SYSPARM RELOAD
C. -SET SYSPARM(dsnzparm name)
D. -SET SYSPARM LOAD(dsnzparm name)
Answer: D

IBM   000-617   000-617

NO.2 In order to separate DB2 security administration duties from DB2 system administration duties, which
step(s) must be performed?
A. Set both SECADM system parameters to an authorization ID and Role.
B. Specify YES to SEPARATE_ SECURITY and set one SYSADM system parameter to an authorization
ID or Role.
C. Specify YES to SEPARATE_ SECURITY and set one SECADM system parameter to an authorization
ID or Role.
D. Specify YES to PROTECT parameter and set one SECADM system parameter to an
authorization ID or Role.
Answer: C

IBM   000-617   000-617최신덤프   000-617덤프   000-617

NO.3 What is NOT required for recovery of the DB2 catalog at a disaster recovery site?
A. All catalog table spaces.
B. IBM defined indexes on the catalog.
C. XML objects for the catalog table spaces.
D. LOB objects for the catalog table spaces.
Answer: C

IBM   000-617자료   000-617

NO.4 Which directory table space CANNOT be REORGed in DB2 10?
A. DSNDB01.SPT01
B. DSNDB01.SCT02
C. DSNDB01.SYSUTILX
D. DSNDB01.SYSLGRNX
Answer: C

IBM   000-617   000-617자료   000-617

NO.5 What process does the RESTORE SYSTEM utility NOT perform?
A. Restores logs from the log copy pool.
B. Applies logs to the data to a point in time.
C. Restores data from the database copy pool.
D. Applies only logs to the data if LOGONLY is specified.
Answer: A

IBM시험문제   000-617   000-617

NO.6 What is the process to automatically start an audit policy at DB2 startup?
A. Specify DSNZPARM subsystem parameters AUDITST = *
B. Specify DSNZPARM subsystem parameter AUDITST = YES
C. Specify DSNZPARM subsystem parameter TRACSTR = YES
D. UPDATE SYSIBM.SYSAUDITPOLICIES SET DB2START=Y for the row of the audit policy to be auto
started.
Answer: D

IBM dumps   000-617   000-617자료   000-617   000-617 dump   000-617

NO.7 When a data sharing member fails, what is the final state of the connections to the DB2 lock structure
in the coupling facility?
A. It is finally marked as FAILING.
B. It is immediately marked as FAILED PERSISTENT for the failing member.
C. It is marked as FAILING and then finally changed to FAILED PERSISTENT upon receiving
DiscFailCon from all members.
D. It is marked as FAILED PERSISTENT and then finally changed to FAILING upon receiving
DiscFailCon from all members.
Answer: C

IBM pdf   000-617 dumps   000-617자료   000-617시험문제   000-617

NO.8 Which of the following statements is NOT correct regarding the dynamic statement cache?
A. The dynamic statement cache resides in an above-the-bar pool.
B. Performance problems can occur if the dynamic statement cache is too small.
C. The REOPT(VARS) bind option is necessary in order to store the access path for a dynamic SQL
statement in the dynamic statement cache.
D. When updating statistics for an object manually, you need to invalidate statements in the dynamic
statement cache that refer to this object using RUNSTATS REPORT NO UPDATE NONE against the
object.
Answer: C

IBM dump   000-617   000-617 dump   000-617   000-617

NO.9 The standard audit trace has limitations. Which statement is true?
A. You can audit the catalog tables.
B. You can audit every access to a table.
C. You can audit all utilities including DSN1.... ones.
D. You can start a specific audit trace at DB2 startup.
Answer: D

IBM자료   000-617인증   000-617   000-617인증   000-617

NO.10 You start your DB2 subsystem and check the messages in the MSTR address space. DB2 issues
message DSNJ120I indicating that it detected unequal timestamps in the BSDSs. What is the required
action to allow DB2 to start successfully?
A. DB2 restart is halted and an open reply lets you use the -RECOVER BSDS command to fix the
problem.
B. Use the VSAM REPRO utility to overwrite the older BSDS with the most recent one and issue START
DB2 again.
C. DB2 shuts down when this problem occurs. You must issue -START DB2 again and DB2 will try to
re-synchronize the BSDSs now.
D. No action is needed. DB2 automatically tries to re-synchronize and continues with the restart if the
re-synchronization was successful.
Answer: D

IBM시험문제   000-617 pdf   000-617 pdf   000-617

NO.11 You have just defined the profile monitoring tables and related indexes using the DSNTIJSG job in the
SDSNSAMP library. In order to monitor the number of remote threads and connections you must insert
rows into the SYSIBM.DSN_PROFILE_TABLE and SYSIBM.DSN_PROFILE_ATTRIBUTES tables to
specify the monitoring functions to be used.
What is the next step in this process?
A. Issue the -START PROFILE command.
B. Issue the -DISPLAY THREAD command.
C. Issue the -START TRACE (MONITOR) command.
D. No further steps are needed. DB2 will automatically begin monitoring those DB2 threads identified in
the monitoring profile.
Answer: A

IBM   000-617   000-617   000-617

NO.12 What does the command -ALTER GROUPBUFFERPOOL(GBP1) RATIO(5.6) do?
A. Changes the ratio of directory entries to the local cache entries (LCE).
B. Changes the desired ratio of the number of lock entries to the number of data pages in the group buffer
pool.
C. Changes the desired ratio of the number of directory entries to the number of data pages in the group
buffer pool.
D. Changes the desired number of the data pages cast out to those that remain in the group buffer pool
when the group buffer pool checkpoint occurs.
Answer: C

IBM dumps   000-617자료   000-617   000-617   000-617

NO.13 DB2 10 enhances the profile table monitoring facility to support the filtering and threshold monitoring for
the number of connections using which categories?
A. All local and DRDA connections.
B. Collection IDs and IP addresses.
C. Role and Authorization Identifiers.
D. Product Identifiers and Package Names.
Answer: C

IBM dump   000-617기출문제   000-617자격증

NO.14 Assume that you have implemented identity propagation and that the distributed user name is 'MARY'.
You have mapped this user name to the RACF user ID 'DB2USER1'. Which statement is true?
A. 'MARY' is authenticated by RACF.
B. 'DB2USER1' must be defined on the remote system.
C. Remote requests execute with the authority of 'MARY'.
D. Audit records for this transaction contains both RACF user ID 'DB2USER1' and the distributed user
'MARY'.
Answer: D

IBM   000-617   000-617   000-617기출문제

NO.15 In a production DB2 subsystem, the display of database DBFW8401 shows that pages have been
added to the LPL. The indexes for the database have the COPY NO attribute.
Which utility is used to remove these pages from the LPL status?
A. REPAIR
B. RECOVER
C. CHECK INDEX
D. REBUILD INDEX
Answer: D

IBM자격증   000-617   000-617 pdf   000-617기출문제   000-617

NO.16 Which limiting attribute CANNOT be included in the definition of a trusted context?
A. A DB2 SSID.
B. An IPv4 address.
C. An IPv6 address.
D. A secure domain name.
Answer: A

IBM dumps   000-617기출문제   000-617자격증   000-617자료

NO.17 To satisfy a requirement to track and report on the administrative changes made by users with system
DBADM authority, which DB2 catalog table must be modified to enable this requirement.?
A. SYSIBM.SYSDBAUTH
B. SYSIBM.SYSRESAUTH
C. SYSIBM.SYSUSERAUTH
D. SYSIBM.SYSAUDITPOLICIES
Answer: D

IBM   000-617   000-617   000-617   000-617

NO.18 You have implemented hash access on a production table. In order to optimize hash access
performance you need to monitor the storage space utilized by hash access. How would you accomplish
this?
A. View real time statistics for the table.
B. Run RUNSTATS with the UPDATE SPACE option.
C. Issue the -DISPLAY DATABASE(*) SPACENAM(*) USE command.
D. Utilize a monitoring profile using the -DISPLAY PROFILE command.
Answer: A

IBM pdf   000-617   000-617   000-617기출문제   000-617시험문제

NO.19 To cancel any type of thread using a -CANCEL THREAD command what information is needed?
A. The token of the thread to be canceled.
B. The luwid of the thread to be canceled.
C. The connection name of the thread to be canceled.
D. The correlation name of the thread to be canceled.
Answer: A

IBM인증   000-617최신덤프   000-617기출문제

NO.20 Which statement describes a DB2 ROLE?
A. A role is a privilege.
B. A role is a USERID.
C. A role is a RACF entity.
D. A role is a database entity.
Answer: D

IBM   000-617   000-617시험문제   000-617

경쟁이 치열한 IT업계에서 굳굳한 자신만의 자리를 찾으려면 국제적으로 인정받는 IT자격증 취득은 너무나도 필요합니다. IBM인증 000-617시험은 IT인사들중에서 뜨거운 인기를 누리고 있습니다. ITExamDump는 IT인증시험에 대비한 시험전 공부자료를 제공해드리는 전문적인 사이트입니다.한방에 쉽게IBM인증 000-617시험에서 고득점으로 패스하고 싶다면ITExamDump의IBM인증 000-617덤프를 선택하세요.저렴한 가격에 비해 너무나도 높은 시험적중율과 시험패스율, 언제나 여러분을 위해 최선을 다하는ITExamDump가 되겠습니다.