Symantec 인증ST0-10X인증시험공부자료는ITExamDump에서 제공해드리는Symantec 인증ST0-10X덤프가 가장 좋은 선택입니다. ITExamDump에서는 시험문제가 업데이트되면 덤프도 업데이트 진행하도록 최선을 다하여 업데이트서비스를 제공해드려 고객님께서소유하신 덤프가 시장에서 가장 최신버전덤프로 되도록 보장하여 시험을 맞이할수 있게 도와드립니다.
지금 같은 세대에 많은 분들이 IT업계에 관심을 가지고 있습니다. 이렇게 인재가 많은 사회에서 IT관련인사들은 아직도 적은 편입니다. 면접 시에도 IT인증 자격증유무를 많이들 봅니다. 때문에 IT자격증이 많은 인기를 누리고 있습니다.이런 살아가기 힘든 사회에서 이런 자격증들 또한 취득하기가 넘 어렵습니다.Symantec ST0-10X인증시험 또한 아주 어려운 시험입니다. 많은 분들이 응시하지만 통과하는 분들은 아주 적습니다.
ITExamDump 에서 제공해드리는 Symantec ST0-10X덤프는 아주 우수한 IT인증덤프자료 사이트입니다. IT업계엘리트한 강사들이 퍼펙트한 Symantec ST0-10X 덤프문제집을 제작하여 디테일한 시험문제와 답으로 여러분이 아주 간단히Symantec ST0-10X시험을 패스할 수 있도록 최선을 다하고 있습니다.
Symantec 인증 ST0-10X시험에 도전해보려고 결정하셨다면 ITExamDump덤프공부가이드를추천해드립니다. ITExamDump덤프는 고객님께서 필요한것이 무엇인지 너무나도 잘 알고 있답니다. ITExamDump의 Symantec 인증 ST0-10X덤프는Symantec 인증 ST0-10X시험을 쉽게 만듭니다.
일반적으로Symantec인증시험은 IT업계전문가들이 끊임없는 노력과 지금까지의 경험으로 연구하여 만들어낸 제일 정확한 시험문제와 답들이니. 마침 우리ITExamDump 의 문제와 답들은 모두 이러한 과정을 걸쳐서 만들어진 아주 완벽한 시험대비문제집들입니다. 우리의 문제집으로 여러분은 충분히 안전이 시험을 패스하실 수 있습니다. 우리 ITExamDump 의 문제집들은 모두 100%보장 도를 자랑하며 만약 우리ITExamDump의 제품을 구매하였다면Symantec관련 시험패스와 자격증취득은 근심하지 않으셔도 됩니다. 여러분은 IT업계에서 또 한층 업그레이드 될것입니다.
만약 시험만 응시하고 싶으시다면 우리의 최신Symantec ST0-10X자료로 시험 패스하실 수 있습니다. ITExamDump 의 학습가이드에는Symantec ST0-10X인증시험의 예상문제, 시험문제와 답 임으로 100% 시험을 패스할 수 있습니다.우리의Symantec ST0-10X시험자료로 충분한 시험준비하시는것이 좋을것 같습니다. 그리고 우리는 일년무료 업데이트를 제공합니다.
시험 번호/코드: ST0-10X
시험 이름: Symantec (Veritas Storage Foundation 5 for Unix (STS))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 198 문항
업데이트: 2013-12-01
ST0-10X 덤프무료샘플다운로드하기: http://www.itexamdump.com/ST0-10X.html
NO.1 The vxprint command output for volume vol07 indicates that it has three plexes. How will you
determine which plexes are used for data?
A.Note the lengths. Data plexes are all the same length.
B.Note the STATE field. Non-data plexes will be indicated by the value: LOG.
C.Note the STATE field. Data plexes will be indicated by the value: MIRROR.
D.Note the RECORD TYPE field. Data plexes are designated with PL.
Answer: B
Symantec기출문제 ST0-10X기출문제 ST0-10X덤프
NO.2 The 'Administer' button in the Storage Foundation Management Server user interface for a host is
continually red, and the vxsvc32 agent is listed as DOWN.
How do you solve this problem?
A.Reconfigure the Storage Foundation management Server.
B.Reinstall the agent.
C.Restart Storage Foundation Management Server.
D.Change the types.ini configuration file on the Central Management Server.
Answer: D
Symantec ST0-10X pdf ST0-10X최신덤프 ST0-10X기출문제
NO.3 What is the default limit to the number of subdisks that can be attached to a single plex?
A.1024
B.2048
C.4096
D.Unlimited
Answer: C
Symantec ST0-10X기출문제 ST0-10X최신덤프
NO.4 You have large number of mirrored volumes, and the resynchronization process on mirrored volumes
will take lot of time. You want to address enable Dirty Region Logging (DRL) and find out the cause why it
takes a long time for resynchronization. You want to check the status of DRL logging to see if it is already
enabled.
How will you accomplish this task?
A.Use the vxprint command with the -F%drllogging $DCOVOL option
B.Use the vxprint command with the -F%drllogging $DRLVOL option
C.Use the vxprint command with the -F%dcologging $DCOVOL option
D.Use the vxprint command with the -F%drllogging $$DCONAME option
Answer: D
Symantec인증 ST0-10X ST0-10X ST0-10X ST0-10X
NO.5 Which two restrictions does relayout place on the administration of a volume while it is in progress?
(Select two.)
A.During a relayout, you cannot create a sparse plex.
B.During a relayout, you cannot change the number of mirrors in a volume.
C.During a relayout, you cannot change the number of subdisks in a volume.
D.During a relayout, you cannot create a snapshot of a volume.
E.During a relayout, you cannot create a backup of a volume.
Answer: AD
Symantec ST0-10X최신덤프 ST0-10X인증 ST0-10X
NO.6 You want to allow non-layered volume to change to layered stripe-mirror volume while remaining online.
What is the correct procedure to perform this conversion?
A.Convert the volume, stop the volume, remount the file system, and start the volume.
B.Unmount the file system, stop the volume, convert the volume, start the volume, and remount the file
system.
C.Resync the volume, convert the volume, and mirror the volume.
D.Stop the volume and then convert the volume.
Answer: C
Symantec pdf ST0-10X ST0-10X기출문제
NO.7 What is the minimum number of plexes required for true mirroring to provide redundancy of data?
A.One
B.Two
C.Three
D.Four
Answer: B
Symantec ST0-10X자격증 ST0-10X시험문제 ST0-10X ST0-10X ST0-10X최신덤프
NO.8 You have installed Storage Foundation 5.0 Standard server with a number of hosts. You want to
centrally monitor and manage the hosts. You also want to generate reports for the hosts and the storage
resources that the hosts consume. What should you do?
A.Install the Veritas Quick I/O option on Storage Foundation 5.0 server.
B.Install Veritas Storage Foundation Management Server on Storage Foundation 5.0 server.
C.Install Veritas Storage Foundation Management Host on Storage Foundation 5.0 server.
D.Upgrade Storage Foundation 5.0 Standard to Storage Foundation 5.0 Enterprise.
Answer: B
Symantec ST0-10X ST0-10X ST0-10X최신덤프
NO.9 Which command will you use to determine the operating mode of vxconfigd?
A.vxdctl enable
B.vxdctl mode
C.vxmode
D.ps -ef |grep vxconfig
Answer: B
Symantec ST0-10X ST0-10X ST0-10X dumps
NO.10 Which physical storage device is the equivalent to a virtual volume?
A.A disk
B.A partition
C.A block
D.A directory
Answer: B
Symantec ST0-10X ST0-10X인증 ST0-10X ST0-10X dumps
NO.11 You place six physical disks under Volume Manager control to create 10GB of volume. You want to
use this volume as an archive directory. You need to create a volume that will store three copies of the
archived data. Which command will you use to create a volume with three plexes?
A.vxassist make archivevol 30g layout=stripe-mirror nmirror=3
B.vxassist make archivevol 30g layout=stripe-mirror ncolumn=3
C.vxassist make archivevol 10g layout=stripe-mirror nmirror=3
D.vxassist make archivevol 10g layout=stripe-mirror ncolumn=3
Answer: C
Symantec자료 ST0-10X ST0-10X시험문제 ST0-10X dumps ST0-10X ST0-10X인증
NO.12 You are monitoring a file system on a Solaris operating system using Veritas Volume Manager when
the following kernel message appears: WARNING: msgcnt x: mesg 069: V-2-69: memory usage specified
by the vxfs:vxfs_ninode and vxfs:vx_bc_bufhwm parameters exceeds available memory; the system may
hang under heavy load. You need to resolve this error. What should you do?
A.Increase the value of one or both parameters to 100% of physical memory or to 100% of kernel virtual
memory
B.Remove either the physical memory parameter or the kernel virtual memory parameter.
C.Leave the parameters at current levels and disregard the system message because it is a false
message.
D.Reduce the value of one or both parameters to less than 50% of physical memory or to 66% of kernel
virtual memory
Answer: D
Symantec자료 ST0-10X pdf ST0-10X자료 ST0-10X ST0-10X시험문제
NO.13 You are auditing a current storage environment that is not utilizing storage tiering. The information
gained from the audit is to be used in a new storage tiering design that will have 4 tiers (Tiers 1-4). You
need to determine the location for archive data which needs to be accessible but is not used heavily.
Where should you store this data?
A.Tier 1: High-end storage arrays with fast, reliable network connections.
B.Tier 2: High-end arrays, but performance is not a priority.
C.Tier 3: Mid-range to low-end storage arrays with fast, reliable network connections.
D.Tier 4: low-cost media, such as tape, with little consideration given to performance.
Answer: C
Symantec ST0-10X ST0-10X ST0-10X덤프
NO.14 Which structure records are stored in the private region? (Each correct Answer presents part of the
solution. Select three.)
A.Disk group configuration
B.Disk and disk group ID
C.File system metadata
D.Disk group kernel log
E.Partition tables
Answer: ABD
Symantec인증 ST0-10X기출문제 ST0-10X dump ST0-10X ST0-10X
NO.15 You need to create a volume for the HR department. You need to mount a file system with a high
demand for I/O throughput. You are aware that spanning the volume across multiple disks will increase
the I/O performance. Which risk should you be aware of when spanning the volume across multiple
disks?
A.Write throughput degradation
B.Single disk failure causes volume failure
C.Requirement for disk redundancy
D.Poor I/O performance
Answer: B
Symantec기출문제 ST0-10X ST0-10X ST0-10X
NO.16 You are working with the Storage Foundation Intelligent Storage Provisioning feature, to create a new
mirrored volume. To prevent system failure, you want to ensure that you are able to perform a recovery of
mirrored volumes in minimum response time.
What should you do?
A.Create a Dirty Region Log.
B.Create a Data Change Map log.
C.Create a RAID-5 log.
D.Create a Snap object log.
Answer: A
Symantec자료 ST0-10X인증 ST0-10X ST0-10X dumps
NO.17 Which form of Disk Spanning allows you to map data in equally-sized chunks alternating across
multiple disks and is also known as interleaving?
A.Striping
B.Concatenation
C.Mirroring
D.Parity
Answer: A
Symantec ST0-10X ST0-10X인증 ST0-10X
NO.18 How many free partitions do you need to encapsulate a boot disk?
A.1
B.2
C.3
D.4
Answer: B
Symantec시험문제 ST0-10X ST0-10X ST0-10X ST0-10X
NO.19 You are responsible for administering the Storage Foundation for Sybase server. You want to remove a
mounted volume. What should you do first to ensure you are able to remove the mounted volume?
A.Remove the snapshot from the associated volume.
B.Recursively remove all plexes and subdisks.
C.Disassociate the snapshot from the associated volume.
D.Unmount the file system.
Answer: B
Symantec자료 ST0-10X ST0-10X인증 ST0-10X ST0-10X덤프
NO.20 Which three are the database agents that are supported by Storage Foundation High Availability
version? (Select three.)
A.Informix
B.DB/2
C.Ingress
D.Oracle
E.Sybase
F.SQL
Answer: BDE
Symantec최신덤프 ST0-10X인증 ST0-10X ST0-10X ST0-10X자격증
ITexamdump의 650-304덤프의 VCE테스트프로그램과 70-342덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP5-K01D시험에 대비한 고품질 덤프와 HP2-N40시험 최신버전덤프를 제공해드립니다. 최고품질 70-410시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기