ITExamDump를 선택함으로 여러분은 Symantec 인증250-270시험에 대한 부담은 사라질 것입니다.우리 ITExamDump는 끊임없는 업데이트로 항상 최신버전의 Symantec 인증250-270시험덤프임을 보장해드립니다.만약 덤프품질을 확인하고 싶다면ITExamDump 에서 무료로 제공되는Symantec 인증250-270덤프의 일부분 문제를 체험하시면 됩니다.ITExamDump 는 100%의 보장도를 자랑하며Symantec 인증250-270시험을 한번에 패스하도록 도와드립니다.
ITExamDump의Symantec인증 250-270덤프는 고객님의 IT인증자격증을 취득하는 소원을들어줍니다. IT업계에 금방 종사한 분은 자격증을 많이 취득하여 자신만의 가치를 업그레이드할수 있습니다. ITExamDump의Symantec인증 250-270덤프는 실제 시험문제에 대비하여 연구제작된 퍼펙트한 시험전 공부자료로서 시험이 더는 어렵지 않게 느끼도록 편하게 도와드립니다.
시험 번호/코드: 250-270
시험 이름: Symantec (Administration of Symantec NetBackup 7.0 for Unix)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 237 문항
업데이트: 2013-09-22
ITExamDump의Symantec인증 250-270시험덤프 공부가이드는 시장에서 가장 최신버전이자 최고의 품질을 지닌 시험공부자료입니다.IT업계에 종사중이라면 IT자격증취득을 승진이나 연봉협상의 수단으로 간주하고 자격증취득을 공을 들여야 합니다.회사다니면서 공부까지 하려면 몸이 힘들어 스트레스가 많이 쌓인다는것을 헤아려주는ITExamDump가 IT인증자격증에 도전하는데 성공하도록Symantec인증 250-270시험대비덤프를 제공해드립니다.
IT업종 종사자분들은 모두 승진이나 연봉인상을 위해 자격증을 취득하려고 최선을 다하고 계실것입니다. 하지만 쉴틈없는 야근에 시달려서 공부할 시간이 없어 스트레스가 많이 쌓였을것입니다. ITExamDump의Symantec인증 250-270덤프로Symantec인증 250-270시험공부를 해보세요. 시험문제커버율이 높아 덤프에 있는 문제만 조금의 시간의 들여 공부하신다면 누구나 쉽게 시험패스가능합니다.
ITExamDump의 경험이 풍부한 전문가들이Symantec 250-270인증시험관련자료들을 계획적으로 페펙트하게 만들었습니다.Symantec 250-270인증시험응시에는 딱 좋은 자료들입니다. ITExamDump는 최고의 덤프만 제공합니다. 응시 전Symantec 250-270인증시험덤프로 최고의 시험대비준비를 하시기 바랍니다.
250-270 덤프무료샘플다운로드하기: http://www.itexamdump.com/250-270.html
NO.1 Which two media status designations are excluded in the count against maximum number of partially
full media? (Select two.)
A. Frozen
B. Imported
C. Active
D. Available
E. Inactive
Answer: AB
Symantec최신덤프 250-270 250-270 dump 250-270시험문제
NO.2 A restore must be performed. The administrator is trying to view the valid images for a client, but the
following error occurs:
WARNING: Server does not contain any valid images.
Which two may be incorrectly configured? (Select two.)
A. schedule type for restores
B. destination client for restores
C. server to use for backups and restores
D. media server for backups and restores
E. policy types for restore
Answer: CE
Symantec 250-270시험문제 250-270 250-270자격증
NO.3 Catalog configuration can be configured to email which file to aid in catalog recovery?
A. BMR file
B. master server config file
C. support script output
D. DR file
Answer: D
Symantec 250-270 250-270자료
NO.4 Which Symantec NetBackup 7.0 volume pool is created by default?
A. Data
B. Scratch
C. None
D. Catalog
Answer: C
Symantec인증 250-270덤프 250-270 pdf 250-270 pdf 250-270
NO.5 The configuration parameters MIN_GB_SIZE_PER_DUPLICATION_JOB and
IMAGE_EXTENDED_RETRY_PERIOD_IN_HOURS are part of the configuration for which feature?
A. Catalog Replication
B. FlashBackup
C. Storage Lifecycle Policy
D. NetBackup Vault
Answer: C
Symantec자격증 250-270 pdf 250-270 dump 250-270 dumps 250-270 250-270자료
NO.6 An organization has Symantec NetBackup 7.0 client machines with a large number of files distributed
across multiple file systems that are being backed up to a library with high-speed tape drives.
Which two steps should the administrator take to ensure the greatest number of backup streams are
active concurrently? (Select two.)
A. select the "Enable multiple data streams" policy attribute and edit the "Maximum jobs per client" master
server host property
B. create a "Media Server Load Balancing" type storage unit group to enable additional backup streams to
become active simultaneously
C. enable the client-side deduplication feature so that only unique data is sent from the client to the media
server
D. select the Enable multiplexing attribute within the storage unit and the policy schedule
E. configure the "Max drives this master" attribute to the number of tape drives that are available within
the library
Answer: AD
Symantec 250-270 dumps 250-270 250-270덤프
NO.7 Where are exclude list configurations stored?
A. media server
B. master server
C. client
D. Enterprise Media Manager (EMM) server
Answer: C
Symantec 250-270 250-270 250-270
NO.8 A company has just expanded the Symantec NetBackup 7.0 environment by adding an additional
media server.
What is the fastest way to update several hundred Symantec NetBackup clients with the new media
server information?
A. run the update_all_clients script
B. run the add_media_server_on_clients script
C. specify the new media server in the Backup, Archive, and Restore interface
D. specify the new media server in the client properties
Answer: B
Symantec자료 250-270덤프 250-270 250-270자격증 250-270
NO.9 A tape library had the robot firmware upgraded and now the robot is reading the barcodes with
additional characters.
What can be set so that Symantec NetBackup 7.0 uses the same characters as before the firmware
upgrade occurred?
A. Media ID generation
B. Media ID display
C. media type mapping
D. barcode rules
Answer: A
Symantec인증 250-270시험문제 250-270
NO.10 A Symantec NetBackup 7.0 environment uses a multi-tiered architecture.
Which system functions as the top tier?
A. media server
B. enterprise client
C. client
D. master server
Answer: D
Symantec인증 250-270 250-270시험문제 250-270
NO.11 An administrator is remotely logged into a Symantec NetBackup 7.0 server via the terminal window
and needs to configure robots and drives.
Which command should be used to complete the configuration?
A. vmconf
B. tpreq
C. nbdevconfig
D. tpconfig
Answer: D
Symantec 250-270 250-270최신덤프
NO.12 Which two statements are true about the function of the Initiate Import utility in Symantec Netbackup
7.0? (Select two.)
A. Phase I creates a list of expired images.
B. Phase II lists and creates image files from tape or disk.
C. Phase I reads and creates image files in the image database.
D. Phase I requires each tape to be mounted if tape media is used.
E. Phase II imports the backups and creates fragments.
Answer: AD
Symantec 250-270 250-270인증 250-270
NO.13 A collection of all backup data from a client is assembled into a single stream and written to tape or
disk.
What is this called?
A. file metadata
B. backup policy
C. catalog .f file
D. backup image
Answer: D
Symantec최신덤프 250-270 250-270자료 250-270시험문제
NO.14 Which two types of information are displayed in the Tape Summary report? (Select two.)
A. the number of tapes that are suspended
B. the number of tapes that are offsite
C. the number of tapes that are using compression
D. the number of tapes that are active
E. the number of tapes each client is using
Answer: AD
Symantec 250-270최신덤프 250-270덤프 250-270 250-270자격증
NO.15 Which two databases are used by Symantec NetBackup 7.0? (Select two.)
A. Media
B. Image
C. Volume
D. EMM
E. Device
Answer: BD
Symantec 250-270인증 250-270 250-270 250-270최신덤프
NO.16 Which two items are required to use the Catalog Recovery Wizard? (Select two.)
A. BMR file
B. media used for the catalog backup
C. catalog backup policy
D. DR file
E. critical policy list
Answer: BD
Symantec최신덤프 250-270 250-270 dumps 250-270
NO.17 In a Symantec NetBackup 7.0 environment, where does the image database reside?
A. within the EMM database
B. on the media server
C. on the master server
D. within the master server's Sybase database
Answer: C
Symantec 250-270 250-270인증 250-270시험문제
NO.18 How long will a failed restore job remain in an Incomplete state prior to being moved to a Done state?
A. one day
B. three days
C. seven days
D. until the administrator cancels the restore job
Answer: C
Symantec기출문제 250-270 pdf 250-270시험문제
NO.19 An administrator has created three BasicDisk storage units within the NetBackup Administration
Console (STU-A, STU-B, and STU-C). The administrator needs to create a backup policy that evenly
rotates use of each of these storage units during backup.
How can the policies or storage units be set up to accomplish this?
A. set up each of the policies to use "Any Available" storage unit
B. set up a storage unit group for these STUs and select "Failover" option for storage unit selection
C. set up a storage unit group for these STUs and select "Least recently selected storage unit" option
D. set up a storage unit group for these STUs and select "Choose storage units based on order specified
above" option
Answer: C
Symantec기출문제 250-270 250-270 dumps
NO.20 An administrator successfully creates a disk pool for Symantec NetBackup 7.0, then attempts to
create a new storage unit using the bpstuadd command. In the bpstuadd command, the storage unit
name is specified as diskpool1_storageunit-#01. An error message is returned indicating the storage unit
name is invalid.
How should the storage unit name be modified to fix the problem?
A. remove the "-" from the name
B. remove all the numbers from the name
C. remove the "#" from the name
D. shorten the name to fewer than twenty characters
Answer: C
Symantec 250-270 250-270
ITexamdump의 74-344덤프의 VCE테스트프로그램과 HP2-H28덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1z0-460시험에 대비한 고품질 덤프와 74-338시험 최신버전덤프를 제공해드립니다. 최고품질 650-304시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기